YZX-II tipping bucket fryer:
Equipment introduction and parameters:
(1) The electric heating split heating tank is used for circulating heating and circulating filtration. The heating method can be customized according to customer requirements. It has a pure oil vertical scraping and side scraping structure, double
Layer B mesh belt + Teflon non-adhesive mesh belt
(2) Pot body part:
1. The pot body is made of 4mm thick stainless steel plate, and the bottom plate is 5mm thick and made of 304
2. The pot frame adopts 60*40*3mm stainless steel rectangular tube
3. The insulation adopts 60mm thick aluminum silicate insulation layer, and the outer packaging is high temperature resistant tin foil paper
4. The outer packaging of the pot is made of 1.2mm thick 304 stainless steel plate
5. The boiler body is installed with a drain valve, a circulating filter pipe port and a pumping port
6. Pot body design, slag scraping and side slag outlet
7. The pot body is designed with an oil injection type to make the oil flow, causing the material to turn to achieve a non-stick effect, and the floating material forward timing function.
(3) Mesh belt and mesh belt bracket part
1. The non-stick mesh belt is made of stainless steel and Teflon mesh belt is driven by chains on both sides of the belt. The width of the middle strip is 22mm and the width is 600mm.
2. Type B mesh belt parameters: The total width of the mesh belt is 600mm, the mesh diameter is 2.33mm, the center distance of the mesh is 10mm, the side width is 10mm, and the material is 304. The lower mesh belt is drummed, the drum height is 8mm, and the interval is 200mm
3. The mesh belt bracket is made of 3mm 304 stainless steel cold-formed butt joint
4. The fume exhaust hood and the mesh belt bracket can be lifted independently for easy cleaning
5. Bearings and bearing seats are made of stainless steel
6. The upper and lower mesh belt gap range is 80mm